1500p direct pressure blast cabinet technical data
Blast cabinet
| Working chamber width |
1500mm |
| Working chamber depth |
1200mm |
| Working chamber height |
1000mm |
| Overall width |
1925mm |
| Overall depth |
1900mm |
| Overall height |
2455mm |
| Door opening width |
1060mm |
| Door opening height |
825mm |
| Total weight |
≈1000kg |
Dust collector
| Airflow total volume |
1360m³/hr (800cfm) |
| Airflow velocity |
0.2m/sec (40ft/min) |
| Filter cartridge area |
42m² (452ft²) |
| Air to cloth ratio |
1.8:1 |
| Residual dust content |
< 2 mg/Nm³ |
| Filtering efficiency |
99.99% on 0.5µm particle |
| Reverse pulse on time |
0 – 1 sec. increments of 0.2 sec. |
| Reverse pulse off time |
0 – 5 minutes |
Electrical
| Electrical power supply |
380 – 415 Volt, 50HZ, 3 Phase |
| Cabinet lighting |
2 x 18w |
| Cabinet illumination |
750lux |
| Dust collector fan power |
2.2kw (3hp) |
Compressed air
| Blast generator volume |
15 litres |
| Compressed air consumption |
68m³/hr (40cfm) @ 5.5bar (80psi) |
| Working pressure |
2.0 – 6.8bar (30 – 100psi) |
| Supply air residual oil content |
< 5mg/m³ |
| Supply air residual humidity content |
< 5mg/m³ Pressure dew point 3 - 5°C |
Recommended abrasive
| Glass Beads |
B/3 - AE/10 |
| Aluminium Oxide |
#24 – 180 |
| Steel Grit |
≤G40 |
| Silicon Carbide |
#24 – 180 |
| Stainless Steel Shot |
S10 – S40 |
| Ceramic Beads |
B125 – B20 |
Note: Technical modifications are explicitly reserved by us.
Top of the page
